2012 Nissan Rogue Owner's Manual - Page 186
2012 Nissan Rogue Manual
Page 186 highlights
Bi-level heating: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 This mode directs cool air from the side and center vents and warm air from the foot outlets. When the temperature control dial is turned to the maximum hot or cool position, the air between the ventilators and the foot outlets is the same temperature. 1. Push the air recirculation button to the OFF position. (The indicator light turns off.) 2. Turn the air flow control dial to the position. 3. Turn the fan speed control desired position. dial to the Air conditioner operation S35-D-110201-B5067E1C-0586-411F-A263-C1D511C1E269 The air conditioner system should be operated for approximately 10 minutes at least once a month. This helps prevent damage to the air conditioner system due to the lack of lubrication. Cooling: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 This mode is used to cool and dehumidify the air. 1. Push the air recirculation button to the OFF position. (The indicator light turns off.) 2. Turn the air flow control dial to the position. 3. Turn the fan speed control desired position. dial to the Dehumidified heating: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 This mode is used to heat and dehumidify the air. 1. Push the air recirculation button to the OFF position. (The indicator light turns off.) 2. Turn the air flow control dial to the position. 3. Turn the fan speed control desired position. dial to the 4. Push the A/C button on. (The A/C indicator light will illuminate.) 5. Turn the temperature control dial to the desired position between the middle and the hot (right) position. Dehumidified defogging: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 This mode is used to defog the windows and dehumidify the air. 1. Turn the air flow control dial to the position. 2. Turn the fan speed control desired position. dial to the 4. Turn the temperature control dial to the desired position. Heating and defogging: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 This mode heats the interior and defogs the windows. 1. Turn the air flow control dial to the position. 2. Turn the fan speed control desired position. dial to the 4. Push the A/C button on. (The A/C indicator light will illuminate.) 5. Turn the temperature control dial to the desired position between the middle and the cool (left) position. . For quick cooling when the outside temperature is high, push the air recirculation button to the ON position. Be sure to push the air recirculation button to the OFF position for normal cooling. A visible mist may be seen coming from the ventilators in hot, humid conditions as the air is cooled rapidly. This does not indicate a malfunction. 3. Turn the temperature control dial to the desired position. . 3. Push the A/C button on. (The A/C indicator light will illuminate.) 4. Turn the temperature control dial to the desired position. 4-26 Center display, heater, air conditioner, audio, phone and voice recognition systems