2012 Nissan Rogue Owner's Manual - Page 262

. Engine idling speed is high while warming up the engine. Be especially careful when starting or driving on slippery surfaces. When turning the vehicle in LOCK mode on paved roads, you may feel a braking effect. This is a normal condition of the AWD model. while the engine is running, the warning light will come on. The warning light may blink rapidly (about twice per second) while trying to free a stuck vehicle due to high powertrain oil temperature. The driving mode may change to 2WD. AUTO mode may change to LOCK mode before the warning light blinks. If the warning light blinks rapidly during operation, stop the vehicle with the engine idling in a safe place immediately. Then if the light turns off after a while, you can continue driving. A large difference between the diameters of front and rear wheels will make the warning light blink slowly (about once per two seconds). Pull off the road in a safe area, and idle the engine. Check that all tire sizes are the same, tire pressure is correct and tires are not worn. . CAUTION SSD0336B AWD WARNING LIGHT S35-D-110201-3BC7286A-1220-41F9-A284-3DEC13D72208 The AWD warning light is located in the meter. The AWD warning light illuminates when the ignition switch is turned to the ON position. It turns off soon after the engine is started. If any malfunction occurs in the AWD system . If the warning light remains on after the above operation, have your vehicle checked by a NISSAN dealer as soon as possible. If the warning light comes on while driving there may be a malfunction in the AWD system. Reduce the vehicle speed and have your vehicle . 5-24 Starting and driving