2012 Nissan Rogue Owner's Manual - Page 257

CRUISE CONTROL S35-D-110201-6BA0E60E-E6DD-4377-9F64-19E20F97589F PRECAUTIONS ON CRUISE CONTROL S35-D-110201-E4BDAA6A-ABCA-43DB-9AF9-129EFB44F8C2 . If the cruise control system malfunctions, it will cancel automatically. The SET indicator on the vehicle information display will then blink to warn the driver. If the engine coolant temperature becomes excessively high, the cruise control system will cancel automatically. If the SET indicator on the vehicle information display blinks, turn the cruise control main switch off and have the system checked by a NISSAN dealer. The SET indicator on the vehicle information display may blink when the cruise control main switch is turned ON while pushing the ACCEL/RES, COAST/SET or CANCEL switch. To properly set the cruise control system, perform the following procedures. ... on winding or hilly roads on slippery roads (rain, snow, ice, etc.) in very windy areas . Doing so could cause a loss of vehicle control and result in an accident. . SSD0668 . 1. 2. 3. 4. ACCEL/RES switch COAST/SET switch CANCEL switch MAIN (ON·OFF) switch CRUISE CONTROL OPERATIONS S35-D-110201-B1AAA37C-0645-4382-B965-6CDA161EFC80 The cruise control allows driving at a speed between 25 to 89 MPH (40 to 144 km/h) without keeping your foot on the accelerator pedal. To turn on the cruise control, push the MAIN switch on. The CRUISE indicator on the vehicle information display will illuminate. To set cruising speed, accelerate the vehicle to the desired speed, push the COAST/SET switch and release it. (The SET indicator light on Starting and driving 5-19 WARNING Do not use the cruise control when driving under the following conditions: . . when it is not possible to keep the vehicle at a set speed in heavy traffic or in traffic that varies in speed