2012 Nissan Rogue Owner's Manual - Page 322
2012 Nissan Rogue Manual
Page 322 highlights
Replacing S35-D-110201-88130121-CB19-405B-AC32-F8B7A74D8318 Xenon headlight model: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 Halogen headlight model: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 The headlight is a semi-sealed beam type which uses a replaceable headlight (halogen) bulb. High beam: Wattage: 60 Bulb no.: HB3 WARNING HIGH VOLTAGE When xenon headlights are on, they produce a high voltage. To prevent an electric shock, never attempt to modify or disassemble. Always have your xenon headlights replaced at a NISSAN dealer. For additional information, see "Headlight and turn signal switch" in the "2. Instruments and controls" section. If replacement is required, see a NISSAN dealer. Use the same number and wattage as originally installed: Low beam: Wattage: 35 Bulb no.: D2R High beam: Wattage: 60 Bulb no.: HB3 . . CAUTION Do not leave the bulb out of the headlight reflector for a long period of time. Dust, moisture, smoke, etc. entering the headlight body may affect bulb performance. High pressure halogen gas is sealed inside the halogen bulb. The bulb may break if the glass envelope is scratched or the bulb is dropped. Only touch the plastic base when handling the bulb. Never touch the glass envelope. Aiming is not necessary after replacing the bulb. When aiming adjustment is necessary, contact a NISSAN dealer. . . Use the same number and wattage as originally installed: Low beam: Wattage: 55 Bulb no.: H11 8-26 Maintenance and do-it-yourself