2012 Nissan Rogue Owner's Manual - Page 329
2012 Nissan Rogue Manual
Page 329 highlights
hours, or driven less than 1 mile (1.6 km) at moderate speeds. The recommended cold tire inflation is set by the manufacturer to provide the best balance of tire wear, vehicle handling, driveability, tire noise, etc., up to the vehicle's GVWR. 5 Tire size - see "Tire labeling" later in * this section. 6 Spare tire size or compact spare tire * size (if so equipped) SDI1949 tion shown on the Tire and Loading Information label. 5. Add air to the tire as needed. If too much air is added, press the core of the valve stem briefly with the tip of the gauge stem to release pressure. Recheck the pressure and add or release air as needed. 6. Install the valve stem cap. 7. Check the pressure of all other tires, including the spare. Checking the tire pressure GUID-35F5460B-53F3-48BD-8D36-DF9B4793C040 1. Remove the valve stem cap from the tire. 2. Press the pressure gauge squarely onto the valve stem. Do not press too hard or force the valve stem sideways, or air will escape. If the hissing sound of air escaping from the tire is heard while checking the pressure, reposition the gauge to eliminate this leakage. 3. Remove the gauge. 4. Read the tire pressure on the gauge stem and compare it to the specifica- SIZE P215/70R16 99H P225/60FRONT R17 98H ORIGINAL TIRE P225/55R18 97V COLD TIRE INFLATION PRESSURE 230 kPa, 33 PSI 230 kPa, 33 PSI 230 kPa, 33 PSI*1 260 kPa, 38 PSI*2 Maintenance and do-it-yourself 8-33