2010 Polaris Ranger EV Owners Manual - Page 32
2010 Polaris Ranger EV Manual
Page 32 highlights
FEATURES AND CONTROLS Console Drive Mode Switch CAUTION! Changing the drive mode switch position while driving could result in an automatic increase or decrease in speed without a change to accelerator pedal pressure. High Maximum Range Press the top of the switch to select high mode. Use high mode for most trailLow riding conditions. The vehicle will operate at speeds up to 25 MPH (40 km/h). Press the bottom of the switch to select low mode. Low mode is recommended for short-term operation in extreme load conditions. Use low mode when towing, hauling loads or maneuvering over obstacles. Speed will be limited to a maximum of 10 MPH (16 km/h) and regenerative braking increases to improve control in aggressive terrain. Return the mode switch to high mode for normal operation. Move the switch to the center position to select the maximum range mode. Use this mode to operate the vehicle a greater distance or for a longer time period. This mode limits both speed and torque to obtain the maximum driving range. Mode Maximum Speed High Max Range Low 25 MPH (40 km/h) 15 MPH (24 km/h) 10 MPH (16 km/h) Torque (percent of maximum torque) 70% 50% 100% Deceleration (regenerative braking) Minimum Minimum Maximum Application Trail riding Whenever possible, to maximum driving range of battery pack Towing, hauling loads, driving on steep hills or aggressive terrain 28