2010 Polaris Ranger EV Owners Manual - Page 73

2010 Polaris Ranger EV Manual

Get 2010 Polaris Ranger EV PDF manuals and user guides View all 2010 Polaris Ranger EV manuals

Page 73 highlights

Lights Headlight Beam Adjustment MAINTENANCE X X 8" (20 cm) 25 ft. (7.6 m) 1. Place the vehicle on a level surface with the headlight approximately 25 ft. (7.6 m) from a wall. 2. Measure the distance from the floor to the center of the headlight and make a mark on the wall at the same height. 3. Apply the brakes. Turn the key on. Turn the headlights on. 4. Observe the headlight aim. The most intense part of the headlight beam should be aimed 8" (20 cm) below the mark placed on the wall. Include the weight of a rider on the seat while performing this step. 5. If a headlight needs adjustment, access the adjustment screw under the hood or through the wheel well. 6. Loosen the screw, adjust the headlight, and tighten the screw. 7. Repeat steps 4-6 until the lamp is properly adjusted. 69

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
69
MAINTENANCE
Lights
Headlight Beam Adjustment
1.
Place the vehicle on a level surface with the headlight approxi-
mately 25 ft. (7.6 m) from a wall.
2.
Measure the distance from the floor to the center of the headlight
and make a mark on the wall at the same height.
3.
Apply the brakes. Turn the key on. Turn the headlights on.
4.
Observe the headlight aim. The most intense part of the headlight
beam should be aimed 8" (20 cm) below the mark placed on the
wall. Include the weight of a rider on the seat while performing this
step.
5.
If a headlight needs adjustment, access the adjustment screw under
the hood or through the wheel well.
6.
Loosen the screw, adjust the headlight, and tighten the screw.
7.
Repeat steps 4-6 until the lamp is properly adjusted.
25 ft.
(7.6 m)
8" (20 cm)
X
X