2010 Polaris Ranger EV Owners Manual - Page 74
2010 Polaris Ranger EV Manual
Page 74 highlights
MAINTENANCE Lights Brake Lights When the brake pedal is depressed, the console brake light comes on. Check the brake light before each ride. 1. Turn the key to the ON position. 2. Depress the brake pedal. The brake light should come on after about 10mm (0.4 in.) of pedal travel. If the light doesn't come on, check the bulb. Indicator Lamp Replacement 1. Lift the hood. Release 2. Reach in behind the console Tab panel and lift the release to unplug the light from the harness. 3. Using a flathead screwdriver, press on the tab on the top of the light to remove the indicator light assembly from the console panel. 4. Locate the expired lamp. Using a screwdriver, rotate the lamp 1/4 turn counter-clockwise. 5. Grip the lamp with a needle-nose pliers and remove it from the assembly. 6. Install the new lamp. Using a screwdriver, rotate the lamp 1/4 turn clockwise to seat it. 7. Snap the assembly back into the console panel. Reconnect the harness. 8. Close the hood. 70