2003 Pontiac Sunfire Owner's Manual - Page 312

Parking Brake and Automatic Transaxle Park (P) Mechanism Check 0 To check the parking brake's holding ability: With the engine running and transaxle in NEUTRAL (N), slowly remove foot pressure from the regular brake pedal. Do this until the vehicle is held by the parking brake only. To check the PARK (P) mechanism's holding ability: With the engine running, shift to PARK (P). Then release the parking brake followed by the regular brake. ~~ ~~~ ~~ ~ 0 When you are doing this check, your vehicle could begin to move. You or others could be injured and property could be damaged.Make sure there is room in frontof your vehicle in case it begins to roll. Be ready to apply the regular brake at once should the vehicle begin Underbody Flushing Service At least every spring, use plain water to flush any corrosive materials from the underbody. Take care to clean thoroughly any areas where mud and other debris can collect. Park on a fairly steep hill, with the vehicle facing downhill. Keeping your foot on the regular brake, set the parking brake. 6-21