2003 Pontiac Sunfire Owner's Manual - Page 50

Securing a Child Restraint Designed for the LATCH System 1. Find the anchors for the seating position you want to use, where the bottom of the seatback meets the back of the seat cushion. 2. Put the child restraint on the seat. Securing a Child Restraint in a Rear Seat Position 3. Attach the anchor points on the child restraint to the anchors in the vehicle. The child restraint instructions will show you how. 4. If the child restraint is forward-facing, attach the top strap to the top strap anchor. See Top Strap on page 1-39. Tighten the top strap according to the child restraint instructions. 5. Push and pull the child restraint in different directions to be sure it is secure. U If your child restraint is equipped with the LATCH system, see Lower Anchorages and Top Tethers for Children (LA TCH System) on page 1-41. You'll be using the lap-shoulder belt. See the Top Strap on page 1-39 if the child restraint has one. Be sure to follow the instructions that came with the child restraint. Secure the child in the child restraint when and as the instructions say. To remove the child restraint, simply unhook the top strap from the top tether anchor and then disconnect the anchor points. 1 . Put the restraint on the seat. 2. Pick up the latch plate, and run the lap and shoulder portions of the vehicle's safety belt through or around the restraint. The child restraint instructions will show you how. 1-43