2006 Subaru Legacy Owner's Manual - Page 238

Interior equipment 6-21 from the HomeLink® button surface. 3. Press and hold the hand-held transmitter button. The HomeLink® indicator light will flash, first slowly and then rapidly. 4. When the indicator light begins to flash rapidly, release both buttons. The programming for the previous device is now erased and the new device can be operated by pushing the HomeLink® button. corresponding HomeLink® button after programming, contact HomeLink at www.homelink.com or call 1-800-3553515 for assistance. Erasing HomeLink® button memory NOTE Performing this procedure erases the memory of all the preprogrammed buttons simultaneously. The memory of individual buttons cannot be erased. It is recommended that upon the sale of the vehicle, the memory of all programmed HomeLink® buttons be erased for security purposes. 1. Press and hold the two outside buttons until the indicator light begins to flash (after 20 seconds). 2. Release both buttons. In case a problem occurs If you cannot activate a device using the