AIWA UZ-US501 Operating Instructions - Page 13
AIWA UZ-US501 Manual
View all AIWA UZ-US501 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
4 5 While pressing SHIFT, set the parameter using SELECT C/c. Repeat Steps 3 to 4 to set other parameters. If you do not operate the remote for a few seconds, the parameter turns off and is stored in the system. Getting Started Parameters The following are the parameters. xF-DIS (FRONT DISTANCE) Set the distance from the satellite (Front/ Center) speakers to the listening position. The satellite (Front/Center) speaker distance can be set anywhere from 0.4 (1.2 ft.) to 7.0 metres (21.1 ft.), in steps of 0.2 metres (0.6 ft.).The default setting is 3 metres (9 ft.). xS-DIS (SURROUND DISTANCE) Set the distance from the surround speakers to the listening position in steps of 0.2 metres (0.6 ft.). The surround speaker to listening position distance can be set from equal to that of the satellite (Front/Center) speaker, down to a distance of 4.6 metres (15 ft.) closer than that of the satellite (Front/Center) speaker. The default setting is 3 metres (9 ft.). For instance, when the distance of the satellite (Front/Center) speaker is 6 metres (18 ft.), the surround speaker can be placed at a distance of between 1.4 metres and 6 metres (4.2 to 18 ft.). If the distance of the satellite (Front/Center) speaker is 3 metres (9 ft.), the surround speaker can be placed at a distance of between 0.4 and 3 metres (1.2 to 9.0 ft.). The minimum is 0.4 metre (1.2 ft.). 13GB