Aastra DT423 User Guide - Cordless Phones for MX-ONE - Page 72
Unsubscribe System, Rename System
View all Aastra DT423 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
User Manual Cordless Phones for MX-ONE™ Note: The PARK code may not be needed if there is no alien DECT system within the coverage area. 1 Enter the menu by pressing "Menu". 2 Select in the menu. 3 Select "System". 4 Select "Subscribe". 5 The handset's IPDI is displayed. The IPDI is a unique code that has been assigned to the handset. Press "Next". 6 Enter System name (optional). If no system name is entered, the default name will be used. That is System A, System B etc. depending on which system name that is free. Note: The System name might not be displayed depending on the handset's Display Management Layout setting. See the handset's Configuration Manual. 7 Press "Next". 8 Enter PARK code (max. 31 digits). The PARK code may not be needed if there is no alien DECT system within the coverage area. 9 Enter AC code. The AC code length must be between 4 - 8 digits. 10 Press "Next". 11 An information text "Protection on?" is displayed. Select "Yes" if the new system is to be protected. It is not possible to delete a protected subscription from the System menu14. 12 Press "OK". A searching mode starts. Unsubscribe System 1 Enter the menu by pressing "Menu". 2 Select in the menu. 3 Select "System". 4 Select "Unsubscribe". 5 Select the system to unsubscribe. 6 Press "Yes to unsubscribe the system. Rename System It is possible to change the name of the system in the handset. 1 Enter the menu by pressing the "Menu" soft key. 2 Select in the menu. 3 Select "System". 4 Select "Rename System". 5 Select system to rename. 6 Enter new name. 7 Select "Save". 14.It is not possible to unsubscribe a protected system via the System menu. The unsubscribtion must be made via the Admin menu or the DECT system. 1424-EN/LZT 103 089 B 2014-04-13 66