Aastra OpenCom 131 User Guide - Page 149
OMM IP address
View all Aastra OpenCom 131 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 149 highlights
DECT over IP® Configuration Note: You need a Java runtime library to be able to run Java programmes. If you don't have one installed, you can download the installation programme from the http:// www.java.com/ web site. 2. To log in to the dialogue, you enter: User Password 3. Enter the MAC address of the DECT over IP base station. The MAC address will be printed on the label on the DECT over IP base station's casing. Click on List configuration. The DECT over IP base station's current configuration will be displayed. 4. Change the DECT over IP base station's IP address configuration. Activate the Use local configuration option ("yes") and enter the required details: - IP address: Static IP address of the DECT over IP base station - Net mask: Subnet mask of the DECT over IP base station - OMM IP address: IP address of the DECT over IP Manager. For the actual DECT over IP Manager simply repeat the entry from the IP address entry field. - OMM port number; Leave the default setting on "16321". - PBX IP address: IP address of the OpenCom 100 - PBX port: Leave the default setting on "8099". 5. Under TFTP server address enter the IP address the operating software is to be downloaded from. This will usually be the Media Gateway card's IP address (see MGW Interface Card starting on page 114). Leave the TFTP file name setting on the default setting ("/ram/ip_tel/ip_rfp.cnt"). 6. For a remote location, the OpenCom 100's LAN will usually be accessed via a (VPN) router. Click on Router addresses: [+]. Enter the router's IP address ("default gateway"). Confirm by clicking on Add. 7. Click on Send config to activate the desired IP address configuration. 147