Aastra OpenCom 131 User Guide - Page 75
Technical Data, Dimensions, Weight
View all Aastra OpenCom 131 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Mounting the OpenCom 150 Rack InfoCom System Technical Data 6.2 Technical Data (only if different from the OpenCom 150) Dimensions: ■ Width: 19-inch panel with flange for mounting in installation cabinet ■ Height: 3U ■ Depth: approx. 340 mm Weight: approx. 7.8 kg Connection of 230 VAC power supply on rear side via inlet connector for nonheating apparatus Connection of all ports via RJ 45 jacks on front panel Note: The ISDN S0 ports on the front panel may only be switched in one direction (internal or external). Use of the external port with a crossover (Rx-Tx) patch cable in parallel to the S0 internal port (for two S0 terminals on the same bus) may severely limit the range of the S0 bus. 73
Mounting the OpenCom 150 Rack InfoCom System
Technical Data
73
6.2
Technical Data
(only if different from the OpenCom 150)
Dimensions:
■
Width: 19-inch panel with flange for mounting in installation cabinet
■
Height: 3U
■
Depth: approx. 340 mm
Weight:
approx. 7.8 kg
Connection of 230 VAC power supply on rear side via inlet connector for non-
heating apparatus
Connection of all ports via RJ 45 jacks on front panel
Note:
The ISDN S
0
ports on the front panel may only be
switched in one direction (internal or external). Use of the ex-
ternal port with a crossover (Rx-Tx) patch cable in parallel to
the S
0
internal port (for two S
0
terminals on the same bus)
may severely limit the range of the S
0
bus.