Acer AT350 F2 Acer AT350 F2 Server Service Guide - Page 80
Installing a SAS card, Remove the screw holding the slot in place
View all Acer AT350 F2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
66 3 System upgrades Installing a SAS card 1 Observe the pre-installation instructions on page 26. 2 Remove the side panel described on page 28. 3 If necessary, remove any cables that prevent access to the PCI slot. 4 Locate an empty expansion slot that is compatible with the specification of the card you intend to install. 5 Unclip the restraining latch (1) and open in the direction (2) shown below . 6 Remove the screw holding the slot in place (3). 7 Slide out the slot shield (4). Caution: Do not discard the slot cover. If the expansion card is removed in the future, the slot cover must be reinstalled to maintain proper system cooling. 8 Remove the expansion card from its protective packaging, handling it by the edges.