Acer Veriton 7200D Veriton 7200D - Page 73
Removing and installing a DIMM for the Veriton 7200 series, To remove a DIMM
View all Acer Veriton 7200D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
63 The DDR-SDRAM DIMMs should work under 2.5 volts. PC-2100 (133 MHz) DDR-266 is supported. Contact your dealer for qualified DIMM vendors. Caution! Do not install and use both DDR-200 (PC1600) and DDR266 (PC2100) SDRAM together. Such a combination might cause your computer to malfunction. Removing and installing a DIMM for the Veriton 7200 series Each of the DIMM socket is independent from each other. This independence allows you to install DIMMs with different capacities to form different configurations. To remove a DIMM Note: Observe the "Installation precautions" on page 45 when installing or removing a computer component. Also, make sure that you have removed the computer cover (see page 47). 1. Press the holding clips on both sides of the DIMM socket outward to release the DIMM (a). 2. Gently pull the DIMM out of the socket (b).