Alpine CDA-9855 Owners Manual - Page 19
Recalling the Stored Equalizer Curve, About the Crossover - owners manual
View all Alpine CDA-9855 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Recalling the Stored Equalizer Curve 1 Press and hold MENU for at least 2 seconds. 2 Select the EQ mode by sliding your finger on the GlideTouch bar to the left or right. Press the GlideTouch bar under the EQ mode. 3 Press FUNC. or the GlideTouch bar to activate the preset mode. 4 Select any one of the preset numbers (1 through 6) by sliding your finger on the GlideTouch bar to the left or right. Press the GlideTouch bar under the desire preset to recall the stored contents. 5 Press and hold MENU for at least 2 seconds to return to normal mode. • This function is inoperable when DEFEAT is set to ON (page 15). • You can recall the adjusted equalizer curve from "Equalizer Presets" (page 15). • If MENU is pressed while adjusting or setting the itmes in the MENU mode, the unit will return to the previous selection secreen. • By pressing the GlideTouch bar under RETURN in the MENU mode, the unit will return to the normal mode. • If no peration is performed in 60 seconds, the unit will return to the normal mode. About the Crossover Crossover: This unit is equipped with an active crossover. The crossover limits the frequencies delivered to the outputs. Each channel is controlled independently. Thus, each speaker pair can be driven by the frequencies for which they have been optimally designed. The crossover adjusts the HPF (high pass filter) or LPF (low pass filter) of each band, and also the slope (how fast the filter rolls off the highs or lows). Adjustments should be made according to the reproduction characteristics of the speakers. Depending on the speakers, a passive network may not be necessary. If you are unsure about this point, please consult your authorized Alpine dealer. 2 way mode Cut-off frequency (1/3 octave steps) Slope HPF LPF HPF LPF Level Low range speaker ---- 20 Hz 200 Hz ---- FLAT, 6, 12, 18, 24 dB/oct 0 to −12 dB Rear high range speaker 20 Hz 200 Hz FLAT, 6, ---- 12, 18, ---- 24 dB/oct 0 to −12 dB Front high range speaker 20 Hz 200 Hz FLAT, 6, ---- 12, 18, ---- 24 dB/oct 0 to −12 dB Low range High range 3 way mode Cut-off frequency (1/3 octave steps) Slope HPF LPF HPF LPF Level Low range speaker ---- 20 Hz 200 Hz ---- FLAT, 6, 12, 18, 24 dB/oct 0 to − 12 dB Mid range 20 Hz speaker 200 Hz 20 Hz 20 kHz FLAT, 6, FLAT, 6, 12, 18, 12, 18, 24 dB/oct 24 dB/oct 0 to −12 dB High range 1 kHz speaker 20 kHz FLAT*1 ---- 6, 12, 18, ---- 24 dB/oct 0 to −12 dB *1 Only when selecting USER'S in "Setting the Response Slope for the High Range Speaker (TW SETUP)" (page 29). Low range Mid range High range (Different from actual display) Level adjusting (0 to - 12 dB) Output frequency range Slope FLAT Slope adjusting 20 Hz HPF cut-off frequency (Different from actual display) LPF cut-off frequency • HPF (high pass filter): Cuts the lower frequencies and allows the higher frequencies to pass. • LPF (low pass filter): Cuts the higher frequencies and allows the lower frequencies to pass. • Slope: The level change (in dB) for a frequency change of one octave. • The higher the slope value, the steeper the slope becomes. • Adjust the slope to FLAT to bypass the HP or LP filters. • Do not use a tweeter without the HPF on or set to a low frequency, as it may cause damage to the speaker due to the low frequency content. • You cannot adjust the crossover frequency higher than the HPF or lower than the LPF. • Adjustment should be made according to the recommended crossover frequency of the connected speakers. Determine the recommended crossover frequency of the speakers. Adjusting to a frequency range outside that recommended may cause damage to the speakers. For the recommended crossover frequencies of Alpine speakers, refer to the respective Owner's Manual. We are not responsible for damage or malfunction of speakers caused by using the crossover outside the recommended value. (Different from actual display) 17-EN