Alpine CDA-9855 Owners Manual - Page 44
NO IPOD, NO FILE, Error 01, ERROR-01, Error 02, ERROR-02 - ipod cable
View all Alpine CDA-9855 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Indication for iPod Mode NO IPOD • The iPod is not connected. - Make sure the iPod is correctly connected. Make sure the cable is not bent excessively. • The iPod's battery remains low. - Refer to the iPod's documentation and charge the battery. NO FILE • There are no songs in the iPod. - Download songs to the iPod and connect to the CDA-9855/ CDA-9853. Error 01 (CDA-9855) ERROR-01 (CDA-9853) • Communication error - Turn the ignition key off, and then set to ACC or ON again. - Check the display by reconnecting between the iPod and the adapter, using the iPod cable. Error 02 (CDA-9855) ERROR-02 (CDA-9853) • Caused by the iPod Software Version not being compatible with the adapter KCA-420i (sold separately). - Refer to the Owner's Manual of the adapter KCA-420i (sold separately) and update the iPod Software Version to be compatible with the adapter KCA-420i (sold separately). Specifications FM TUNER SECTION Tuning Range Area 1 Area 2 Mono Usable Sensitivity 50 dB Quieting Sensitivity Alternate Channel Selectivity Signal-to-Noise Ratio Stereo Separation Capture Ratio 87.7-107.9 MHz 87.5-108.0 MHz 9.3 dBf (0.8 µV/75 ohms) 13.5 dBf (1.3 µV/75 ohms) 80 dB 80 dB 45 dB 2.0 dB AM TUNER SECTION Tuning Range Area 1 Area 2 Sensitivity (IEC Standard) 530-1,710 kHz 531-1,602 kHz 22.5 µV/27 dB CD PLAYER SECTION Frequency Response Wow & Flutter (% WRMS) Total Harmonic Distortion Dynamic Range Signal-to-Noise Ratio Channel Separation 5 - 20,000 Hz (±1 dB) Below measurable limits 0.008% (at 1 kHz) 95 dB (at 1 kHz) 105 dB 85 dB (at 1 kHz) PICKUP Wave length Laser power 795 nm CLASS I REMOTE CONTROL Battery Type Width Height Depth Weight AAA batteries (2 pcs.) 42 mm (1-21/32") 121 mm (4-25/32") 23 mm (29/32") 50 g (1.8 oz) GENERAL Power Requirement 14.4 V DC (11-16 V allowable) Power Output 18 W RMS × 4* * Primary amplifier ratings per CEA-2006 Standard • Power output: measured at 4 Ohms and ≤ 1% THD+N • S/N: 80 dBA (reference: 1 W into 4 Ohms) Maximum Pre-Output Voltage 4 V/10 k ohms (CDA-9855) 2 V/10 k ohms (CDA-9853) Weight 1.6 kg (3 lbs. 8 oz) CHASSIS SIZE Width Height Depth 178 mm (7") 50 mm (2") 160 mm (6") NOSEPIECE SIZE Width Height Depth 170 mm (6-11/16") 46 mm (1-13/16") 19 mm (11/16") • Due to continuous product improvement, specifications and design are subject to change without notice. 42-EN