Alpine CDA-9855 Owners Manual - Page 9
Getting Started - installation
View all Alpine CDA-9855 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Getting Started SOURCE/ POWER RESET Rotary encoder MENU GlideTouch bar c Turning Power On and Off Press SOURCE/POWER to turn on the unit. • The unit can be turned on by pressing any other button except TITLE (CDA-9853 only) and eject c. Press and hold SOURCE/POWER for at least 2 seconds to turn off the unit. • The first time power is turned on, the volume will start from level 12. Initial System Start-Up Be sure to press the RESET switch when using the unit for the first time, after installing the CD changer, after changing the car battery, etc. 1 Turn off the unit power. 2 Press RESET with a ball-point pen or similar pointed object. Setting the Time and Calendar (CDA-9855 only) 1 Press MENU. 2 Select SETUP by sliding your finger on the GlideTouch bar to the left or right. Press the GlideTouch bar under SETUP. The main SETUP menu is displayed. 3 Select GENERAL by sliding your finger on the GlideTouch bar to the left or right. Press the GlideTouch bar under GENERAL. The GENERAL SETUP menu is displayed. 4 Select CLOCK ADJUST by sliding your finger on the GlideTouch bar to the left or right. Press the GlideTouch bar under CLOCK ADJUST. 5 Select "Year" by sliding your finger on the GlideTouch bar to the left or right. 6 Adjust "Year" by turning the Rotary encoder. 7 Adjust "Month", "Day", "Hour" and "Minute" by turning the Rotary encoder by repeating steps 5 and 6. 8 After setting, press and hold MENU for at least 2 seconds to return to normal mode. • To synchronize the clock to another clock/watch or radio time announcement, press and hold the Rotary encoder for at least 2 seconds after setting the "hour." Minutes will reset to 00. If the display shows over "30" minutes when you do this, the time will advance one hour. • If MENU is pressed while adjusting or setting the itmes in the MENU mode, the unit will return to the previous selection secreen. • By pressing the GlideTouch bar under RETURN in the MENU mode, the unit will return to the normal mode. • If no peration is performed for 60 seconds, the unit will return to the normal mode. Setting Time (CDA-9853 only) 1 Press MENU. 2 Select SETUP by sliding your finger on the GlideTouch bar to the left or right. Press the GlideTouch bar under SETUP. The main SETUP menu is displayed. 3 Select GENERAL by sliding your finger on the GlideTouch bar to the left or right. Press the GlideTouch bar under GENERAL. The GENERAL SETUP menu is displayed. 4 Select CLOCK by sliding your finger on the GlideTouch bar to the left or right. Press the GlideTouch bar under CLOCK. 5 Select "Hour" by sliding your finger on the GlideTouch bar to the left or right. 6 Adjust "Hour" by turning the Rotary encoder. 7 Adjust "Minute" by turning the Rotary encoder by repeating steps 5 and 6. 8 After setting, press and hold MENU for at least 2 seconds to return to normal mode. • To synchronize the clock to another clock/watch or radio time announcement, press and hold the Rotary encoder for at least 2 seconds after setting the "hour." Minutes will reset to 00. If thedisplay shows over "30" minutes when you do this, the time will advance one hour. • If MENU is pressed while adjusting or setting the itmes in the MENU mode, the unit will return to the previous selection secreen. • By pressing the GlideTouch bar under RETURN in the MENU mode, the unit will return to the normal mode. • If no peration is performed for 60 seconds, the unit will return to the normal mode. 7-EN