Alpine PMD-B100 Owners Manual - Page 6
Installation
UPC - 793276100146
View all Alpine PMD-B100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
261985 PMD-B100_r15.qxd 9/13/06 3:15 PM Page 6 INSTALLATION ■ How to Mount Blackbird WARNING Improper installation may make the navigation system fall out from the cradle while driving. Please make sure all locks and knobs are turned tight. Do not install the navigation while driving. 3 4 5 1 Find a spot suitable for the navigation system. Ensure that both the suction cup and windshield area are clean and free of dirt and grease before attaching it. Stick the suction cup mount against the windshield. Turn the knob to activate the vacuum to lock the position. 2 Turn the knob counterclockwise to adjust up/down position. Then turn clockwise to set the position. 3 Turn the knob clockwise to adjust right/left position. Then turn counter clockwise to set the position. DEVICE SHOULD NOT BE INSTALLED SO THAT IT 2 OBSTRUCTS THE DRIVER'S VIEW. 4 Open the antenna before inserting the navigation system into the cradle. For best reception sensitivity, position the antenna 90 degrees to the main unit. 5 Slide the navigation system into the cradle until you hear a click sound. 6 Plug the cigarette lighter charger into the cigarette lighter socket. CAUTION Remove the navigation system when you are away from the vehicle to prevent theft. ■ To Remove the Navigation System from the Cradle 1 Press and hold the eject button on the cradle. 2 Grasp the navigation system behind the antenna and remove by sliding up and out of the cradle. Note to California consumers: California Vehicle Code 26708 prohibits the placement of any object on windows. Refer to your authorized Alpine dealer for other installation options. 6