Apple M8889LL/A User Guide - Page 36
Secure the server in the rack by tightening the thumbscrews on the front.
UPC - 718908456057
View all Apple M8889LL/A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Place the Server in the Rack Once you've attached the cable-management arm, you can put the server into the rack. 1 At the front of the rack, lift the server to the level where the enclosure's cover is installed and slide the server into the cover. Insert the server into the cover and slide it all the way back. 2 Secure the server in the rack by tightening the thumbscrews on the front. Tighten the two thumbscrews to secure the server in the rack. To secure the drive modules in the server, use the enclosure key to lock them in place. 3 To further secure the server and prevent removal of the drive modules, use the enclosure key (supplied with the server) to fasten the security lock on the front panel. (See the illustration above.) 36 Chapter 3