Apple M8889LL/A User Guide - Page 66

Don't force the card. If you meet a lot of resistance, pull the card out. Check

Get Apple M8889LL/A - Xserve - 512 MB RAM PDF manuals and user guides
UPC - 718908456057
View all Apple M8889LL/A manuals
Add to My Manuals
Save this manual to your list of manuals

Page 66 highlights

7 Remove the card you're installing from its packaging and hold it by its corners, taking care not to touch the gold connector or any of the components on the card. 8 Align the card's connector with the expansion slot and carefully press it to the right until the connector is inserted all the way into the slot. Attach the PCI/AGP card to the connector by pushing it in sideways. Be sure to engage the card in this slot on the back panel. Press the card gently but firmly until the connector is fully inserted. m Don't rock the card from side to side; instead, press the card straight into the slot. m Don't force the card. If you meet a lot of resistance, pull the card out. Check the connector and the slot for damage or obstruction, then try inserting the card again. m Pull the card gently to see if it is properly connected. If it resists and stays in place, and if its gold connectors are barely visible, the card is connected. 66 Chapter 5

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
66
Chapter
5
7
Remove the card you’re installing from its packaging and hold it by its corners, taking care
not to touch the gold connector or any of the components on the card.
8
Align the card’s connector with the expansion slot and carefully press it to the right until the
connector is inserted all the way into the slot.
Press the card gently but firmly until the connector is fully inserted.
m
Don’t rock the card from side to side; instead, press the card straight into the slot.
m
Don’t force the card. If you meet a lot of resistance, pull the card out. Check the
connector and the slot for damage or obstruction, then try inserting the card again.
m
Pull the card gently to see if it is properly connected. If it resists and stays in place, and if
its gold connectors are barely visible, the card is connected.
Attach the PCI/AGP card to the connector by pushing it in sideways.
Be sure to engage the card in this slot on the back panel.