Asko W6761 User manual General Use & Care Guide EN - Page 18

NAVIGATING THE MENUS The following paragraphs explain how to navigate through the menus and customize the preset programs. If you don't want to make changes in all of the menus, continue to press MENU until the one you do want to change displays. To restore a preset program to its factory default setting, simply press the button for the preset program you want to restore (P1-P4) and hold it down while your press ENTER. The program will revert to its factory default setting. If you change your mind in the process of changing a program, press the Power button to switch the washer off. When you switch the power back on, the program will be as originally set. Remember, the first step to customizing a preset program is to press the button for the program you want to customize (P1-P4). Programs This lets you set the wash program you prefer. (See the "Available Programs" chart on page 16.) You also use this menu to set the machine for a rinse, spin, or drain program. 1. Press MENU until "Select Program" displays. 2. Use the Arrow buttons to scroll through the programs (Heavy, Normal, Light, etc.). 3. When the program you prefer displays, press ENTER. The LCD will display the new program. 4. If you only want to use this setting temporarily (for this one load), press START. When the program ends it will revert back to the previous setting. 5. If you want to save this setting permanently, press ENTER again then press START. The program will retain the change. Temperature This lets you set the wash temperature. The options are 85°, 105°, 120°, 140°, 160°, 175°, and 205°. Only the temperatures available for the wash program you selected will display. (See the "Options Available" chart on page 17.) 1. Press MENU until "Select temperature" displays. 2. Use the Arrow buttons to raise or lower the temperature setting. 3. When the temperature you prefer displays, press ENTER. The LCD will display the new temperature. 4. If you only want to use this setting temporarily (for this one load), press START. When the program ends it will revert back to the previous setting. 5. If you want to save this setting permanently, press ENTER again then press START. The program will retain the change. NOTE: To prevent inadvertent damage to fabrics, the highest temperature you can change permanently is 140°. Spin Speed This lets you set the spin speed. The spin speeds advance in 200 rpm increments. Only the spin speeds available for the wash program you selected will display. (See the "Options Available" chart on page 17.) 1. Press MENU until "Select spin speed" displays. Page 18 2. Use the Arrow buttons to raise or lower the spin speed setting. To omit the spin cycle, press the arrow button until "No Spin" displays. To omit the spin and final drain cycles, press the arrow until "No Drain" displays. (Note: You will have to run a drain program to open the door.) 3. When the spin speed you prefer displays, press ENTER. The LCD will display the new spin speed. 4. If you only want to use this setting temporarily (for this one load), press START. When the program ends it will revert back to the previous setting. 5. If you want to save this setting permanently, press ENTER again then press START. The program will retain the change.