Asus A7V8X-MX SE A7V8X-MX SE User's Manual - Page 41

[Manual] & [CHS] Settings IDE Primary Master IDE HDD Auto-Detection [Press Enter] IDE Primary Master Access Mode [Manual] [CHS] Capacity 40020 MB Cylinder Head Sector Transfer Mode [19158] [ 16] [ 255] UDMA 2 Select Menu Item Specific Help Press [Enter] to select sector addressing method. F1 : Help ↑↓ : Select Item -/+ : Change Value F5 : Setup Defaults ESC : Exit →← : Select Menu Enter : Select Sub-menu F10 : Save and Exit Manually enter the number of cylinders, heads and sectors per track for the drive. Refer to the drive documentation or the drive label for this information. After entering the IDE hard disk drive information into BIOS, use a disk utility, such as FDISK, to partition and format new IDE hard disk drives. This is necessary so that you can write or read data from the hard disk. Make sure to set the partition of the Primary IDE hard disk drives to active. After making your selections on this sub-menu, press the key to return to the Main menu. The Main menu displays the hard disk drive field with your configuration. Access Mode [Auto] Select the hard disk drive type in this field. When Logical Block Addressing (LBA) is enabled, the 28-bit addressing of the hard drive is used without regard for cylinders, heads, or sectors. Note that LBA Mode is necessary for drives with more than 504MB storage capacity. Select [CHS] to make manual entries for configuring the fields below. Configuration options: [CHS] [LBA] [Large] [Auto] Cylinders This field configures the number of cylinders. Refer to the drive documentation to determine the correct value. To make changes to this field, set the IDE Primary Master field to [Manual] and the Access Mode to [CHS]. Head This field configures the number of read/write heads. Refer to the drive documentation to determine the correct value. To make changes to this field, set the IDE Primary Master field to [Manual] and the Access Mode to [CHS]. ASUS A7V8X-MX SE motherboard user guide 2-11