Asus A7V8X-MX SE A7V8X-MX SE User's Manual - Page 44

AGP & P2P Bridge Control AGP & P2P Bridge Control AGP Aperture Size AGP Mode AGP Driving Control AGP Driving Value AGP Fast Write AGP Master 1 WS Write AGP Master 1 WS Read AGP 3.0 Calibration Cycle [64MB] [4X] [Auto] DA [Disabled] [Disabled] [Disabled] [Enabled] Select Menu Item Specific Help F1 : Help ↑↓ : Select Item -/+ : Change Value F5 : Setup Defaults ESC : Exit →← : Select Menu Enter : Select Sub-menu F10 : Save and Exit AGP Aperture Size [XXXMB] This field sets the size of mapped memory for AGP graphic data. Configuration options: [4M] [8M] [16M] [32M] [64M] [128M] [256M] [512M] [1G] AGP Mode [4X] AGP 4X transfers video data at 1066MB/s and is backward-compatible to AGP 1X video card. When set to [1X], the AGP interface only provides a peak data throughput of 266MB/s even if you are using an AGP 4X card. This motherboard also supports the AGP 8X interface. If you install an AGP 8X card, an [8X] option appears in the configuration options. Configuration options: [1X] [2X] [4X] [8X] AGP Driving Control [Auto] This option allows you to automatically select or manually assign the AGP Driving Value. Configuration options: [Auto] [Manual] AGP Driving Value [DA] This item is enabled when you set the AGP Driving Control to [Manual]. Press to assign a hexadecimal AGP Driving Value. Configuration options: [Min = 0000, Max = 00FF] AGP Fast Write [Disabled] This field enables or disables the AGP Fastwrite function. Configuration options: [Disable] [Enable] AGP Master 1 WS Write [Disabled] Configuration options: [Enabled] [Disabled] AGP Master 1 WS Read [Disabled] Configuration options: [Enabled] [Disabled] 2-14 Chapter 2: BIOS information