Asus A7V8X-MX SE A7V8X-MX SE User's Manual - Page 52

2.6 Power menu ACPI Suspend Type Power Management HDD Power Down Suspend Mode Video-off Option AC Loss Auto Restart Video Off Method C.O.P. Control PWR Button < 4 Sec Power Up Control Hardware Monitor [S1&S3] [User Define] [Disabled] [Disabled] [Suspend -> Off] [Auto] [V/H SYNC+Blank] [85 degree] [Instant-off] Select Menu Item Specific Help Select the ACPI state used for System Suspend. F1 : Help ↑↓ : Select Item -/+ : Change Value F5 : Setup Defaults ESC : Exit →← : Select Menu Enter : Select Sub-menu F10 : Save and Exit ACPI Suspend Mode [S1&S3] Allows you to select the ACPI state to used for system suspend. Configuration options: [S1 (POS)] [S3 (STR)] [S1 & S3] Power Management [User Define] Configuration options: [USer Define] [Min Saving] [Max Saving] HDD Power Down [Disabled] Shuts down any IDE hard disk drives in the system after a period of inactivity as set in this user-configurable field. This feature does not affect SCSI hard drives. Configuration options: [1Min]...[15Min] Suspend Mode [Disabled] Sets the time period before the system goes into suspend mode. Configuration options: [1Min] [2Min] [4Min] [6Min] [8Min] [10Min] [20Min] [30Min] [40Min] [1Hour] Video Off Option [Suspend -> Off ] This field determines when to activate the video off feature for monitor power management. Configuration options: [Always On] [Suspend -> Off] AC Loss Auto Restart [Auto] This allows you to set whether or not to reboot the system after AC power loss. [Off] leaves your system off while [On] reboots the system. [Auto] sets the system back to the state it was before the power interruption. Configuration options: [Auto] [On] [Off] 2-22 Chapter 2: BIOS information