Asus A7V8X-MX SE A7V8X-MX SE User's Manual - Page 48

2.5.2 I/O Device Configuration I/O Device Configuration Onboard FDC Controller Onboard Serial Port 1 Onboard Parallel Port Parallel Port Mode ECP Mode USE DMA EPP Mode Select VIA-3058 AC97 Audio Onboard LAN Onboard LAN Boot ROM Game Port Address MIDI Port Address MIDI Port IRQ [Enabled] [3F8/IRQ4] [378/IRQ7] [ECP+EPP] [3] [EPP1.7] [Auto] [Auto] [Disabled] [201] [330] [10] Select Menu Item Specific Help F1 : Help ↑↓ : Select Item -/+ : Change Value F5 : Setup Defaults ESC : Exit →← : Select Menu Enter : Select Sub-menu F10 : Save and Exit Onboard FDC Controller [Enabled] This field allow you to enable the onboard FDC controller. Configuration options: [Enabled] [Disabled] Onboard Serial Port 1 [3F8/IRQ4] These fields allow you to set the address for the onboard serial connector. Configuration options: [3F8/IRQ4] [2F8/1RQ3] [3E8/IRQ4] [2E8/IRQ3] [Auto] [Disabled] Onboard Parallel Port [378/IRQ7] This field allows you to set the address of the onboard parallel port connector. Configuration options: [378/IRQ7] [278/IRQ5] [3BC/1RQ7] Parallel Port Mode [ECP+EPP] This field allows you to set the operation mode of the parallel port. [SPP] allows normal-speed operation but in one direction only; [EPP] allows bidirectional parallel port operation; [ECP] allows the parallel port to operate in bidirectional DMA mode; [ECP+EPP] allows normal speed operation in a two-way mode. Configuration options: [EPP] [ECP] [SPP] [ECP+EPP] ECP Mode USE DMA [3] This field sets the parallel port DMA channel for the selected ECP mode. The default setting is 3. This selection is available only if you select [ECP] or [ECP+EPP] in the Parallel Port Mode item. Configuration options: [1] [3] EPP Mode Select [EPP1.7] This field sets the EPP mode. The default setting is EPP1.7. This selection is available only if you select [EPP] or [ECP+EPP] in the Parallel Port Mode item.0 Configuration options: [EPP1.7] [EPP1.9] 2-18 Chapter 2: BIOS information