Asus A7V8X-MX SE A7V8X-MX SE User's Manual - Page 50

2.5.3 PCI Configuration PCI Configuration Resources controlled by IRQ Resources [Auto (ESCD)] PCI/VGA Palette Snoop Assign IRQ for VGA Assign IRQ for USB [Disabled] [Enabled] [Enabled] Select Menu Item Specific Help BIOS can automatically configure all the boot Plug and Play compatible devices. If you choose [Auto], you cannot select IRQ DMA and memory base address fields, since BIOS automatically assigns them. F1 : Help ↑↓ : Select Item -/+ : Change Value F5 : Setup Defaults ESC : Exit →← : Select Menu Enter : Select Sub-menu F10 : Save and Exit Resources Controlled by [Auto (ESCD)] When set to [Auto (ESCD)], BIOS automatically configures all Plug and Play devices. Setting this item to [Manual], allows manual assignment of IRQ addresses to Plug and Play devices using the IRQ Resources sub-menu. Configuration options: [Auto (ESCD)] [Manual] PCI/VGA Snoop Palette [Disabled] Some non-standard VGA cards, like graphics accelerators or MPEG video cards, may not show colors properly. Setting this field to [Enabled] corrects this problem. If you are using a standard VGA card, leave this field to the default setting [Disabled]. Configuration options: [Disabled] [Enabled] Assign IRQ for VGA [Enabled] Setting this option to [Enabled] allows the BIOS to automatically assign an IRQ address for the VGA controller. Configuration options: [Enabled] [Disabled] Assign IRQ for USB [Enabled] Setting this option to [Enabled] allows the BIOS to automatically assign an IRQ address for the USB controller. Configuration options: [Enabled] [Disabled] 2-20 Chapter 2: BIOS information