Asus P4PE-BP Motherboard DIY Troubleshooting Guide - Page 26
Jumpers
View all Asus P4PE-BP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
1.11 Jumpers 1. Keyboard power (3-pin KBPWR1) This jumper allows you to enable or disable the keyboard wake-up feature. Set this jumper to pins 2-3 (+5VSB) if you wish to wake up the computer when you press a key on the keyboard (the default is the Space Bar). This feature requires an ATX power supply that can supply at least 1A on the +5VSB lead, and a corresponding setting in the BIOS. P4PE BP KBPWR1 12 23 +5V +5VSB ® (Default) P4PE BP Keyboard Power Setting 2. Wireless PCI and USB settings (3-pin WPCI_USB) These jumpers are reserved. DO NOT change the default settings. WPCI_USB ® P4PE BP P4PE BP WPCI_USB Setting 31 53 42 Wireless PCI_USB 64 Original PCI reserved pin (Default) 1-16 Chapter 1: Product introduction
1-16
Chapter 1: Product introduction
1.11
Jumpers
1.
Keyboard power (3-pin KBPWR1)
This jumper allows you to enable or disable the keyboard wake-up feature. Set
this jumper to pins 2-3 (+5VSB) if you wish to wake up the computer when you
press a key on the keyboard (the default is the Space Bar). This feature
requires an ATX power supply that can supply at least 1A on the +5VSB lead,
and a corresponding setting in the BIOS.
2.
Wireless PCI and USB settings (3-pin WPCI_USB)
These jumpers
are reserved. DO NOT change the default settings.
P4PE BP
P4PE BP
WPCI_USB Setting
WPCI_USB
Wireless
PCI_USB
(Default)
3
5
4
6
1
3
2
4
Original
PCI
reserved pin
P4PE BP
P4PE BP
Keyboard Power Setting
KBPWR1
+5V
(Default)
+5VSB
23
12