Asus P8Z77-V DELUXE P8Z77-V DELUXE User's Manual - Page 54
Marvell, Serial ATA 6.0 Gb/s connectors 7-pin SATA6G_E1/E2 [navy blue], Marvell Storage Controller - ssd caching
View all Asus P8Z77-V DELUXE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
3. Marvell® Serial ATA 6.0 Gb/s connectors (7-pin SATA6G_E1/E2 [navy blue]) These connectors connect to Serial ATA 6.0 Gb/s hard disk drives via Serial ATA 6.0 Gb/s signal cables. Chapter 2 • You must install Windows® XP Service Pack 3 or later versions before using Serial ATA hard disk drives. • When using NCQ, set the Marvell Storage Controller item in the BIOS to [Enabled]. Refer to section 3.5.6 Onboard Devices Configuration for details. • Press + during POST to enter the Marvell RAID utility to create or delete a RAID configuration. • If you want to install a Windows operating system to a RAID configuration created using the Marvell SATA controller, you have to create a RAID driver disk using the motherboard support DVD and load the driver during OS installation. For 32/64bit Windows XP OS, load first the Marvell shared library driver, and then load Marvell 91xx SATA Controller Driver. For Windows Vista / Windows 7 OS, load only the Marvell 91xx SATA Controller Driver. • Connect one HDD and one SSD to Marvell® SATA6G_E1/E2 connectors for a high performance of ASUS SSD Caching. • The SATA6G_E1/E2 connectors are recommended for regular use. ASUS P8Z77-V DELUXE 2-29