Asus PCH-DL User Manual - Page 38
Hardware information, IEEE 1394 setting 3-pin J3, USB device wake-up 3-pin USBPW1, USBPW2
View all Asus PCH-DL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
3. IEEE 1394 setting (3-pin J3) This jumper allows you to enable or disable the onboard IEEE 1394 controller. Set to pins 1-2 to activate the 1394 feature. PCH-DL PCH-DL 1394 Function Setting J3 12 23 Enable (Default) Disable 4. USB device wake-up (3-pin USBPW1, USBPW2) Set these jumpers to +5V to wake up the computer from S1 sleep mode (CPU stopped, DRAM refreshed, system running in low power mode) using the connected USB devices. Set to +5VSB to wake up from S3 and S4 sleep modes (no power to CPU, DRAM in slow refresh, power supply in reduced power mode). PCH-DL PCH-DL USB Device Wake Up USBPW1 2 1 +5V (Default) 3 2 +5VSB USBPW2 12 23 +5V (Default) +5VSB 1. The USB device wake-up feature requires a power supply that can provide 500mA on the +5VSB lead for each USB port. Otherwise, the system would not power up. 2. The total current consumed must NOT exceed the power supply capability (+5VSB) whether under normal condition or in sleep mode. 2-20 Chapter 2: Hardware information