Asus PCH-DL User Manual - Page 81
Reset Configuration Data [Disabled], Resources Controlled By [AutoESCD], PCI/VGA Pallete Snoop [
View all Asus PCH-DL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
4.4.7 PCIPnP This menu shows the PCIPnP configuration settings. Select an item then press Enter to display a pop-up menu with the configuration options. PCIPnP Reset Configuration Data Resources Controlled By IRQ Resources PCI/VGA Pallete Snoop INT Pin 1 Assignment INT Pin 2 Assignment INT Pin 3 Assignment INT Pin 4 Assignment INT Pin 5 Assignment INT Pin 6 Assignment INT Pin 7 Assignment INT Pin 8 Assignment [Disabled] [Auto(ESCD)] [Disabled] [Auto] [Auto] [Auto] [Auto] [Auto] [Auto] [Auto] [Auto] Select Menu Item Specific Help Default is Disabled. Select Enabled to reset Extended System Configuration Data (ESCD) upon exiting Setup, if you installed a new add-on card and the system cannot boot due to a serious conflict in system configuration. Reset Configuration Data [Disabled] Allows you to enable or disabled resetting of the Extended System Configuration Data (ESCD) when you exit the Setup. The ESCD includes information on non-PnP devices. Set this item to [Enabled] if you installed an expansion card that conflicts with other devices and cause system boot failure. Configuration options: [Disabled] [Enabled] Resources Controlled By [Auto(ESCD)] When set to [Auto(ESCD)], allows BIOS to automatically configure of all boot and Plug and Play devices. When set to [Manual], you can assign the available IRQ Resources to the PCI devices. Configuration options: [Auto(ESCD)] [Manual] When the item Resources Controlled By is set to [Auto(ESCD)], the item IRQ Resources is grayed out and not user-configurable. Refer to the section "IRQ Resources" for information on how to enable this item. PCI/VGA Pallete Snoop [Disabled] Some non-standard VGA cards, like graphics accelerators or MPEG video cards, may not show colors properly. Setting this field to [Enabled] corrects this problem. If you are using a standard VGA card, leave this field to the default setting [Disabled]. Configuration options: [Disabled] [Enabled] ASUS PCH-DL motherboard 4-23