Asus PCH-DL User Manual - Page 55

POST message, Action

Page 55 highlights

POST message Action No keyboard detected • Check your keyboard if properly connected to the purple PS/2 connector on the rear panel. • See section "2.7.1 Rear panel connectors" for the location of the connector. No floppy disk detected • Make sure you have connected a floppy disk to the floppy disk connector on the motherboard. • See section "2.7 Connectors." No IDE hard disk detected • Make sure you have connected an IDE hard disk drive to the one of the IDE connectors on the motherboard. • See section "2.7 Connectors." CPU temperature too high • Check CPU fan if working properly. CPU fan failed • Check the CPU fan and make sure it turns on after you applied power to the system. • Make sure that your CPU fan supports the fan speed detection function. CPU voltage out of range • Check your power supply and make sure it is not defective. • Call ASUS technical support for assistance. See the "ASUS contact information." System completed Power-On Self Test • No action required Computer now booting to operating system • No action required ASUS PCH-DL motherboard 3-3

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100

ASUS PCH-DL motherboard
3-3
POST message
Action
No keyboard detected
Check your keyboard if properly
connected to the purple PS/2
connector on the rear panel.
See section “2.7.1 Rear panel
connectors” for the location of the
connector.
No floppy disk detected
Make sure you have connected a
floppy disk to the floppy disk
connector on the motherboard.
See section “2.7 Connectors.”
No IDE hard disk detected
Make sure you have connected an
IDE hard disk drive to the one of the
IDE connectors on the motherboard.
See section “2.7 Connectors.”
CPU temperature too high
Check CPU fan if working properly.
CPU fan failed
Check the CPU fan and make sure
it turns on after you applied power
to the system.
Make sure that your CPU fan
supports the fan speed detection
function.
CPU voltage out of range
Check your power supply and
make sure it is not defective.
Call ASUS technical support for
assistance. See the “ASUS contact
information.”
System completed Power-On Self Test
No action required
Computer now booting to operating
No action required
system