Asus PCH-DL User Manual - Page 86

Restore on AC Power Loss [Power Off] When set to [Power Off], the system goes into "off state" after an AC power interruption. When set to [Power On], the system turns on automatically after an power interruption. When set to [Last State], the system goes into whatever was the system state (on or off) before the power interruption. Configuration options: [Power Off] [Power On] [Last State] Video Off Method [DPMS] This item determines the video off features. The Display Power Management System (DPMS) feature allows the BIOS to control the video display card if it supports the DPMS feature. [Blank Screen] only blanks the screen. Use this for monitors without power management or "green" features. Configuration options: [Blank Screen] [V/H SYNC+Blank] [DPMS] Video Off In Suspend [Yes] This item determines when to activate the video off feature for monitor power management. Configuration options: [Yes] [No] MODEM Use IRQ [3] Allows you to select the IRQ assignment for the modem. Configuration options: [NA] [3] [4] [5] [7] [9] [10] [11] Soft-Off by PWR-BTTN [Instant-Off] When set to [Instant-Off], the system goes to soft off when you press the power button for less than 4 seconds. When set to [Delay 4 Sec], press the power button for more than 4 seconds to power off the system. Configuration options: [Instant-Off] [Delay 4 Sec.] USB Wake-Up From S3(S4) [Disabled] Allows you to enable or disable system wake-up from S3 or S4 mode through a USB keyboard/mouse event. Configuration options: [Disabled] [Enabled] Power On By PCI Devices [Enabled] Allows you to enable or disable the PME to generate a wake-up event. Configuration options: [Disabled] [Enabled] Power On By External Modem [Disabled] Allows you to enable or disable system power up when the external modem receives a call while in soft-off mode. Configuration options: [Disabled] [Enabled] 4-28 Chapter 4: BIOS Setup