Asus PCH-DL User Manual - Page 50

16. System panel connector (20-pin PANEL) This connector accommodates several system front panel functions. Power LED Speaker Connector PLED+ LAN_LINK PLED+5V HD_LED+ HD_LEDSpeaker LAN_ACT +5VSB MLED PWR Ground Reset Ground PCH-DL PCH-DL System Panel Connector Message LED Reset SW ATX Power Switch* * Requires an ATX power supply. • System Power LED (3-pin PLED) This lead connects to the system power LED. The LED lights up when you turn on the system power, and blinks when the system is in sleep mode. • Message LED (2-pin MLED) This lead connects to the message LED cable on the front panel and indicates the booting status. The LED blinks when the system is in the boot process until the operating system is loaded. • System warning speaker (4-pin SPKR) This lead connects to the case-mounted speaker and allows you to hear system beeps and warnings. • Hard disk activity (2-pin HD_LED) This lead connects the HDD LED cable. The read or write activities of the device connected to the any of IDE connectors cause the IDE LED to light up. • Power switch / Soft-off switch (2-pin PWR_SW) This lead connects a switch that controls the system power. Pressing the power switch turns the system between ON and SLEEP, or ON and SOFT OFF, depending on the BIOS or OS settings. Pressing the power switch while in the ON mode for more than 4 seconds turns the system OFF. • Reset switch (2-pin RESET) This lead connects to the case-mounted reset switch for rebooting the system without turning off the system power. 2-32 Chapter 2: Hardware information