Asus ROG MAXIMUS Z790 FORMULA ROG Z790 Series BIOS Manual English - Page 21
DIMM Flex: Dynamic DRAM Temperature OC Switcher, BCLK Frequency : DRAM Frequency Ratio
View all Asus ROG MAXIMUS Z790 FORMULA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
SVID Behavior Allows you to program the CPU's SVID behavior based on the CPU's quality. The default option is based on [Typical Scenario], but the more optimistic the mode selected, the lower the temperature of the CPU. [Intel's Fail Safe] is the default behavior of the processor oblivious to the actual Motherboard design. [Trained] optimizes SVID behavior to match input parameters such as VRM Loadline and Target Frequencies. Configuration options: [Auto] [Best-Case Scenario] [Typical Scenario] [Worst-Case Scenario] [Intel's Fail Safe] [Trained] BCLK Frequency : DRAM Frequency Ratio [Auto] The BCLK frequency to DRAM frequency ratio will be set to the optimized setting. [100:133] The BCLK frequency to DRAM frequency ratio will be set to 100:133. [100:100] The BCLK frequency to DRAM frequency ratio will be set to 100:100. Memory Controller : DRAM Frequency Ratio BCLK Frequency: DRAM Frequency Ratio of 100:133 tends to overclock better and 1:2 Memory Controller: DRAM Frequency Ratio only works with even numbered DRAM Ratios and not odd numbered ratios. Configuration options: [Auto] [1:1] [1:2] [1:4] DRAM Frequency Allows you to set the memory operating frequency. The configurable options vary with the BCLK (base clock) frequency setting. Select the auto mode to apply the optimized setting. The configuration options for this item vary depending on the DIMM model you installed on the motherboard. The frequency ratios in gray are not recommended, use BCLK + ratios in white to reach your target frequency if needed. DIMM Flex Enable to configure DRAM Timings and Frequencies based on DRAM Temperature. Set this item to [Disabled] to disable this feature. Configuration options: [Disabled] [Enabled] • DRAM settings will remain at Level1 at BIOS boot until the handover to OS. • The following item appears only when DIMM Flex is set to [Enabled]. DIMM Flex: Dynamic DRAM Temperature OC Switcher Configure DRAM Timings and Frequencies based on DRAM Temperature. DIMM Flex Presets Allows you to select DIMM Flex Presets for different memory modules. ROG Z790 Series (Intel® 14th) BIOS Manual 21