Asus ROG MAXIMUS Z790 FORMULA ROG Z790 Series BIOS Manual English - Page 92
Water Pump+ Speed Low Limit, Water Pump+ Step Down
View all Asus ROG MAXIMUS Z790 FORMULA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
Water Pump+ Q-Fan Control Allows you to set the Water Pump+ operating mode. [Auto Detect] Detects the type of installed fan/pump and automatically switches the control modes. [DC Mode] [PWM Mode] Enables the Q-Fan Control feature in DC mode for 3-pin fan/pump. Enables the Q-Fan Control feature in PWM mode for 4-pin fan/ pump. Water Pump+ Profile Allows you to set the appropriate performance level of the assigned fan/pump. When selecting [Manual], we suggest raising your fan/pump duty to 100% if your CPU temperature exceeds 75°C. Please be noted CPU performance will throttle due to overheating with inefficient fan/pump duty. Configuration options: [Standard] [Silent] [Turbo] [Full Speed] [Manual] The following items appear only when Water Pump+ Profile is set to [Standard], [Silent], [Turbo], or [Manual]. Water Pump+ Q-Fan Source The assigned fan/pump will be controlled according to the selected temperature source. Configuration options: [CPU] [CPU Package] [MotherBoard] [VRM] [Chipset] [T_ Sensor] [Water In T Sensor] [Water Out T Sensor] [Multiple Sources] Water Pump+ Step Up Step up allows you to adjust how quickly the fan rotation speed increases, with level 0 being an instantaneous change in speed. The higher the level, the slower the change in speed, and may also result in less noise, but this will also cause slower heat dissipation. Configuration options: [Level 0] [Level 1] [Level 2] [Level 3] [Level 4] [Level 5] Water Pump+ Step Down Step down allows you to adjust how quickly the fan rotation speed decreases, with level 0 being an instantaneous change in speed. The higher the level, the slower the change in speed, and may also result in less noise, but this will also cause slower heat dissipation. Configuration options: [Level 0] [Level 1] [Level 2] [Level 3] [Level 4] [Level 5] Water Pump+ Speed Low Limit Allows you to set the lower speed limit for assigned fan/pump. A warning message will appear when the limit is reached; the warning message will not appear if [Ignore] is selected. Configuration options: [Ignore] [200 RPM] [300 RPM] [400 RPM] [500 RPM] [600 RPM] The following items appear only when Water Pump+ Profile is set to [Manual]. Water Pump+ Point4 Temperature When the temperature source is lower than the temperature of P4, the duty cycle will be determined according to the P3-P4 and the temperature source. When the temperature source is higher than the temperature of P4, the fan will operate at the duty cycle of P4. Use the or keys to adjust the temperature. 92 ROG Z790 Series (Intel® 14th) BIOS Manual