Asus TS100-E3 PI2 User Guide - Page 53
direction of the arrow.
View all Asus TS100-E3 PI2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
To reinstall the power supply unit: 1. Remove the chassis cover. Refer to section "2.1.1 Removing the side cover." 2. Remove the front panel assembly. Refer to section "2.5.1 Removing the front panel assembly. 3. Lay the chassis on a flat, stable surface. 4. Carefully slide the PSU in the direction of the arrow. 5. Secure the PSU to the chassis with the four screws you removed earlier. 6. Re-connect all the power plug to the connector inside the case. ASUS TS300-E3 2-35
2-35
2-35
2-35
2-35
2-35
ASUS TS300-E3
ASUS TS300-E3
ASUS TS300-E3
ASUS TS300-E3
ASUS TS300-E3
5.
Secure the PSU to the chassis
with the four screws you removed
earlier.
To reinstall the power supply unit:
1.
Remove the chassis cover. Refer to section “2.1.1 Removing the side
cover.”
2.
Remove the front panel assembly. Refer to section “2.5.1 Removing the
front panel assembly.
3.
Lay the chassis on a flat, stable
surface.
4.
Carefully slide the PSU in the
direction of the arrow.
6.
Re-connect all the power plug to
the connector inside the case.