Asus TS100-E3 PI2 User Guide - Page 93

4.4.5 Chipset Configuration The Chipset Configuration menu allows you to change the advanced chipset settings. Select an item then press to display the sub-menu. Advanced BIOS SETUP UTILITY Advanced Chipset Settings DRAM Frequency [Auto] Configure DRAM Timing by SPD [Enabled] Manual DRAM Drequency Setting or Auto by SPD. Onboard LAN Boot ROM [Enabled] PEG Port Configuration [Enabled] PEG Port PEG Port VC1 Map PEG Force x1 Memory Remap Feature [Enabled] [TC7] [Disabled] [Disabled] Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit v02.58 (C)Copyright 1985-2004, American Megatrends, Inc. DRAM Frequency [Auto] Allows you to set the DDR operating frequency. Configuration options: [Auto] [533 MHz] [667 MHz] Configure DRAM Timing by SPD [Enabled] When this item is enabled, the DRAM timing parameters are set according to the DRAM SPD (Serial Presence Detect). When disabled, you can manually set the DRAM timing parameters through the DRAM sub-items. The following sub-items appear when this item is Disabled. Configuration options: [Disabled] [Enabled] Onboard LAN Boot ROM [Enabled] Allows you to enable or disable the option ROM in the onboard LAN controller. Configuration options: [Enabled] [Disabled] PEG Port Configuration [Enabled] PEG Port [Enabled] Allows you to set or disable the PCI Express Graphic port. Configuration options: [Enabled] [Disabled] PEG Port VC1 Map [TC7] Configuration options: [TC1]~[TC7] PEG Force x1 [Disabled] Configuration options: [Disabled] [Enabled] ASUS TS100-E3 4-23