Asus TS100-E3 PI2 User Guide - Page 90
Remote Access Configuration
View all Asus TS100-E3 PI2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
4.4.3 Remote Access Configuration Advanced BIOS SETUP UTILITY Configure Remote Access type and parameters Remote Access [Disabled] Select Remote Access type. Remote Access [Disabled] Allows you to enable or disable remote access. Configuration options: [Disabled] [Enabled] When [Remote Access] is enabled, the following options will then show up Serial port number [COM1] Allows you to enable or disable serial port. Configuration options: [Disabled] [Enabled] Serial port Mode [115200 8, n, 1] Allows you to set up serial port mode. Configuration options: [115200 8, n, 1] [57600 8, n, 1] [38400 8, n, 1] [19200 8, n, 1] [09600 8, n, 1] Flow Control [None] Allows you to control the flow. Configuration options: [None] [Hardware] [Software] v02.58 (C)Copyright 1985-2004, American Megatrends, Inc. Redirection After BIOS POST [Always] After Power-On Self-Test, you can enable this function. When the setup is [Always], some OS might not work. Configuration options: [Disabled] [Boot Loader] [Always] Terminal Type [ANSI] Allows you to set up the terminal type. Configuration options: [ANSI] [VT100] [VT-UTF8] VT-UTF8 Combo Key Support [Disabled] Allows you to enable or disable VT-UTF8 Combo Key Support under ANSI or VT-100. Configuration options: [Disabled] [Enabled] 4-20 Chapter 4: BIOS setup