Asus TS100-E3 PI2 User Guide - Page 70
Hard disk drive activity LED Red 2-pin IDE_LED
View all Asus TS100-E3 PI2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
12. System panel connector (20-pin PANEL1) This connector supports several chassis-mounted functions. • System power LED (Green 3-pin PLED) This 3-pin connector is for the system power LED. Connect the chassis power LED cable to this connector. The system power LED lights up when you turn on the system power, and blinks when the system is in sleep mode. • Hard disk drive activity LED (Red 2-pin IDE_LED) This 2-pin connector is for the HDD Activity LED. Connect the HDD Activity LED cable to this connector. The IDE LED lights up or flashes when data is read from or written into the HDD. • System warning speaker (Orange 4-pin SPEAKER) This 4-pin connector is for the chassis-mounted system warning speaker. The speaker allows you to hear system beeps and warnings. • ATX power button/soft-off button (Light Green 2-pin PWRSW) This connector is for the system power button. Pressing the power button turns the system on or puts the system in sleep or soft-off mode depending on the BIOS settings. Pressing the power switch for more than four seconds while the system is ON turns the system OFF. • Reset button (Blue 2-pin RESET) This 2-pin connector is for the chassis-mounted reset button for system reboot without turning off the system power. ® PANEL1 P5MT-MX/C System Panel Connector The system panel connector is color-coded for easy connection. P5MT-MX/C +5V NC FP_ PLED +3VSB FP_ MLED NC +5V GND GND SPEAKER FP_ HDLED+ GND FP_ NMIBTN# GND POWERBTN# GND NC RESETBTN# GND 3-16 Chapter 3: Motherboard information