Asus WL520GC User Manual - Page 20

Connect to APs in, Remote Bridge List, Allow anonymous, Finish, Save & Start, WAN & LAN, IP - wds setup

Get Asus WL520GC - Wireless Router PDF manuals and user guides
UPC - 610839732623
View all Asus WL520GC manuals
Add to My Manuals
Save this manual to your list of manuals

Page 20 highlights

WL-520g Wireless Router User Manual 9 Enable Connect to APs in Remote Bridge List to connect to the other APs in your list. If you want to allow anonymous user to login your network, you can select Yes in Allow anonymous field. In this example, we do not allow anonymous users. 10 Enter the MAC address of AP2, i.e. 000ea6a13f87. Press Add button to add the MAC address to your list. 11 Press Finish button. 12 Press Save & Start botton. Then, we are to setup AP2. 13 Enter the web-based configuration page on AP2. Repeat step 1-2 to setup the same SSID with AP1. Then select WAN & LAN page in IP Config folder. 14 Set the LAN IP address of AP2 to 192.168.1.2. 15 Next, we are to disable the DHCP server function of AP2 since AP1 is the only DHCP server in the wireless LAN. Enter the DHCP Server page in IP Config folder. 16 Choose No to disable DHCP Server and press Apply botton. 17 Repeat step 5-10. Then enter the MAC address of AP1, i.e., 000ea6a13f6e. Repeat step 11-12. After reboot, WDS would work. 19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
19
WL-520g Wireless Router User Manual
Enable
Connect to APs in
Remote Bridge List
to connect
to the other APs in your list.
If you want to allow anonymous user to login your network, you can select
Yes
in
Allow anonymous
field. In this example, we do not allow anonymous users.
9
10
11
12
13
15
Enter the MAC address of
AP2, i.e. 000ea6a13f87.
Press
Add
button to add the
MAC address to your list.
Press
Finish
button.
Press
Save & Start
botton.
Then, we are to setup AP2.
Enter the web-based configuration page on AP2.
Repeat step 1-2 to setup the same SSID with AP1.
Then select
WAN & LAN
page in
IP Config
folder.
Set the LAN IP address of
AP2 to 192.168.1.2.
Next, we are to disable the DHCP server function of
AP2 since AP1 is the only DHCP server in the wireless
LAN. Enter the
DHCP Server
page in
IP Config
folder.
Choose
No
to disable DHCP
Server and press
Apply
botton.
16
14
17
Repeat step 5-10. Then enter the MAC address of AP1, i.e., 000ea6a13f6e.
Repeat step 11-12. After reboot, WDS would work.