Behringer X32-TP User Manual - Page 14
Display and Monitoring, SELECT BUTTONS
View all Behringer X32-TP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
14 X32 DIGITAL MIXER Preliminary User Manual 2.3 Display and Monitoring (18) (19) (20) (21) (24) (25) (26) (27) VIEW VIEW (15) (16) (17) (22) (23) (15) PUSH ENCODERS - These 6 controls adjust the parameters presented at the bottom of the Main Display. The editable function will show a circular icon in the display when continuous control is available. The function will show a broad rectangular icon to indicate that a switch or toggle can be accessed by pushing the encoder. (16) LAYER BUTTONS - Some screens in the Main Display have more than 6 editable parameters which can be accessed by pressing the Layer Up or Down buttons. (17) PAGE SELECT BUTTONS - Use these to scroll through the available screens or to confirm/decline certain actions. (18) MAIN/SOLO METERS - The main stereo output level is displayed here along with the solo level of all channels whose Solo button is active. (19) CATEGORY SELECT BUTTONS - Press one of these buttons to jump directly to the subject you wish to edit or configure. (20) MONITOR LEVEL - Adjust the level of the Monitor outputs with this knob. (21) PHONES LEVEL - Adjust the volume of the headphone outputs, located inside the left and right side caps. (22) MONITOR MONO - Press this button to monitor the audio in mono. (23) DIM - Press this button to reduce the monitor volume. Press the View button to adjust the amount of attenuation along with all other monitoring-related functions. (24) LAMP INPUT - Connect a standard 12 V, 5 Watt gooseneck lamp here. (25) TALKBACK INPUT - Connect a talkback mic via standard XLR cable to this input. (26) TALK LEVEL - Adjust the level of the talkback mic with this knob. (27) TALK A/B - Select the destination for the talkback mic signal with these buttons. Press the View button to edit the talkback routing for A and B.