Belkin F1UP0002uk User Manual - Page 19

Installation Procedure section Step 3. Configuring Wireless Settings 1 1. The default wireless setting is "Auto" mode. The Print Server 2 will detect a connection to a wired-LAN network through the attached Ethernet cable. If the Print Server is connected to a wired network, it will work in that network. To enable 3 wireless mode, the Ethernet cable must be disconnected after final configurations. However, the Ethernet cable needs to stay plugged in for the required wireless configurations 4 in this section. For more detailed information about wireless settings, refer to the "Wireless Configuration" section. 5 2. The "Wireless Network Settings" screen of the Print Server will automatically scan the wireless networks nearby. Select the wireless network to which you would like to connect 6 and click "Next". Alternatively, you can manually enter the wireless-network information ("Manual" mode). 7 The default wireless settings are as follows: 8 Mode: Infrastructure SSID: Default 9 Channel: 11 10 11 12 13 14 15 16 19 17