Belkin F1UP0002uk User Manual - Page 71

Web Management section 1 This page allows the user to define the Extended Service Set Identifier (ESSID), wireless mode (Infrastructure or Ad-Hoc), and channel number. 2 You can enable/disable the wireless function and set up the wireless parameters for the Print Server from here. The parameters include 3 function, mode, ESSID, and channel number. You can manually set the wireless network to which you want to connect in this page, or use the "Site Survey" function to automatically search for an 4 available wireless network with which to associate. 5 Function is for the user to disable, enable, or allow the Print Server to automatically select to connect to the wired 6 or wireless network. If "Disable" is selected, the Print Server can only connect to the network through wired Ethernet. If "Enable" is selected, the Print Server can only 7 connect to the network through a wireless L AN. If "Auto" is selected, the Print Server can automatically decide to enable or disable the wireless function. The Print Server 8 only can work in either Ethernet or wireless-LAN mode. It cannot work in both Ethernet and wireless-LAN modes at 9 the same time. When the Print Server starts up, it will auto- detect if the LAN port is connected to an active network by an Ethernet cable. If the Print Server is connected to an 10 active network by an Ethernet cable when starting up, the Print Server will run in Ethernet mode. If the Print Server is not connected to an active network by an Ethernet cable 11 when starting up, the Print Server will run in wireless-LAN mode. The Print Server's default is in "Auto" mode. 12 Mode is the operation mode of a wireless station. You 13 can choose either "Ad-Hoc" or "Infrastructure" mode. If you do not have an access point and want to use a peer-to-peer connection, you have to choose "Ad-Hoc" 14 mode. If you have an access point as the wireless-LAN infrastructure, you have to choose "Infrastructure" mode. 15 16 71 17