Belkin F1UP0002uk User Manual - Page 30

Operating Print Server & Using the MFPs section 1 Operating Print Server & Using the MFPs 2 After you have followed the Installation Wizard to finish the printer installation, the printer is now connected to your computer. You can 3 start sharing print, scan, card-reader, or fax functions provided by the MFP. 4 Tip 1: If you have finished using the printer, click "Disconnect" to release the printer. Another user 5 cannot use the printer until it is released. Tip 2: We recommend that you enable the "Idle Timeout" 6 setting. The Print Server will automatically release your connection to the printer after a period of idle time that you have assigned. This allows the printer to not be occupied too 7 long and other users to share the printer frequently. Refer to the "All-In-One Print Manager" section for more information. 8 9 10 11 12 13 14 Share Print The printer will be added to "Printers and Faxes" in Windows after 15 the printer is installed. When you have connected to the printer by clicking "Connect" in the Belkin All-In-One Print Manager, the Print Server will automatically create the connection between the printer 16 and your computer, and then you can print a document following the same steps as usual. 17 30