Belkin F1UP0002uk User Manual - Page 77

Web Management section 1 2 3 4 5 6 7 8 9 Disable - The internal DHCP server is disabled (recommended). 10 The Print Server has to get an IP address from a DHCP server in the network or the user has to set the IP address manually. 11 Enable - If DHCP is enabled, you have to assign a valid range 12 of IP addresses. Fill in the "Starting Address", "Range", "Subnet Mask", "Gateway", and "DNS" fields; then the Print Server will assign a unique IP to each DHCP client. However, 13 the Print Server itself will get an IP address from the external DHCP server or use the configured static IP address, if the Print Server is configured for either of these two options on 14 this page. Otherwise, the internal DHCP server will assign the first IP address to itself if no external DHCP server is found 15 and the Print Server is not set up to use a static IP address. 16 77 17