BenQ RM8602K RS232 & LAN Command List - Page 20
Byte1=0x00: IP Setup Mode
View all BenQ RM8602K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
reserved. reserved. (8) Byte8~9 are reserved, and should be (8) Byte8~9 are reserved, and should be 0x00. 0x00. Network 14 Setting Input Value: Byte1 - Byte2 - Byte3...Byte9 Input Value: Byte1 - Byte2 - Byte3...Byte9 (1) Byte1=0x00: IP Setup Mode (1) Byte1=0x00: IP Setup Mode Byte1=0x01: IP Address Byte1=0x01: IP Address Byte1=0x02: Get Subnet Mask Byte1=0x02: Get Subnet Mask Byte1=0x03: Default Gateway Byte1=0x03: Default Gateway Byte1=0x04: Primary DNS Byte1=0x04: Primary DNS Byte1=0x05: Secondary DNS Byte1=0x05: Secondary DNS Byte1=0x06: MAC Address g E1 (2) Byte2~9 are reserved, should be Byte1=0x06: MAC Address Byte1=0x07: Ethernet (RJ45) MAC 0x00. Address (2) Byte2~9 are reserved, should be Return value: Byte1 - Byte2 - 0x00. Byte3...Byte9 The Byte1 at the return value should be Return value: Byte1 - Byte2 - the same as the value of Byte1 at Input Byte3...Byte9 value. Byte2~Byte15 should be hex value The Byte1 at the return value should be 20