BenQ RM8602K RS232 & LAN Command List - Page 5
Protocol Command Description
View all BenQ RM8602K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
RS232 via LAN RJ45 port on a display PC or laptop LAN cable Find the Wired LAN IP address of the connected display from the OSD menu and make sure the display and the computer are within the same network. IP Protocol Port: 4660 RS232 via HDBaseT HDBaseT compatible device RJ45 port on a display D-Sub 9 pin RJ45 PC or laptop D-Sub 9 pin LAN cable Protocol Command Description Item Length TV ID Command Type Command Description Total Bytes of Message excluding "CR" Identification for each of TV TV ID is "01" for LAN control & RS232 control Identify command type, "s" (0x73h): Set Command "g" (0x67h): Get Command "r" (0x72h): Reply Command "+" (0x2Bh): Valid command Reply "-" (0x2Dh): Invalid command Reply Function command code: One byte ASCII code 5